arrl2020
Joined: | Sun, Dec 20th 2020, 15:32 | Roles: | N/A | Moderates: | N/A |
Latest Topics
Topic | Created | Posts | Views | Last Activity |
---|---|---|---|---|
bonding two distant 8' copper grounding rods | Aug 24th 2021, 13:57 | 2 | 5,157 | on 25/8/21 |
Hurricane-ready (rotatable) antenna mast holder | Feb 19th 2021, 12:39 | 1 | 4,957 | on 19/2/21 |
Latest Posts
Topic | Author | Posted On |
---|---|---|
bonding two distant 8' copper grounding rods | arrl2020 | on 24/8/21 |
Greetings from Noobland: I want to install an antenna mast that will hold an over-the-air omni-directional TV antenna, and a yagi for my UHF/VHF transceiver. The metal mast will be anchored to a concrete block on the ground, and my gutters. I plan to electrically ground the mast, and the coax cables coming from the antennas to a new 8’ copper ground rod that will be only six inches from where the mast touches the ground. How do I bond the new 8’ copper ground rod to the existing (20 year-old) 8’ ground rod that is under my residential load center that is 90’ away on the other side of the house? Is this idea dumb or doable? |
||
Hurricane-ready (rotatable) antenna mast holder | arrl2020 | on 19/2/21 |
I want to put up an external vertical (15 foot high) antenna mast that I can occasionally rotate 90 degrees from the Y axis to the X axis, so that when a hurricane blows through my state I can rotate the mast to lay flat on the ground. The gutters on my house already have a notch for a vertical ground-based mast, so when a hurricane is in-bound, the mast could be rotated and secured to the ground, parallel to my house. Does anyone have any thoughts about the mechanism I could use on the ground to hold the mast in its usual vertical orientation, but also let it rotate? |